Apex by Stanton, available to the trade through Interiors Fine Flooring in the Laguna Design Center, Laguna Niguel. Request a complimentary sample, add it to a project, or ask our team about custom sizes, colors and lead times.
Stanton Apex carpet is a tufted broadloom in 100 percent Scotchgard 3M solution-dyed nylon from the Atelier Vertex collection, made 12 feet wide. The herringbone is small, repeating at 3 by 2 3/4 inches, so it reads as a tailored texture across a room. Solution-dyed nylon is colorfast, durable and cleans well, and Stanton rates Apex for residential and commercial use with residential and commercial wear warranties and a Stain Safe limited stain warranty. Four colorways are offered: Bone, Oyster, Putty and Wave. Apex suits living rooms, dining rooms, bedrooms, stairs and hallways, and can be cut and bound into a custom rug or runner.
| Manufacturer | Stanton |
|---|---|
| Type | Broadloom |
| Collection | Atelier Vertex |
| Fiber | 100% Scotchgard 3m, SD Nylon |
| Construction | Tufted |
| Pattern | Herringbone and Chevron |
| Roll width | 12 ft |
| Features | Custom rug available |
Colorways (4): Bone, Oyster, Putty, Wave
To the trade only. Stock and running-line pieces are net quoted by the showroom; custom work is quoted with its rendering. Samples are complimentary and ship from the mill to you or your client.
Questions about Apex
- What is Apex made of?
- Apex is 100% Scotchgard 3m SD Nylon, in a Tufted construction.
- How wide is Apex?
- Apex is woven 12 ft wide. We plan seams to the room on the drawing before the order goes to the mill, allowing for the 3"W x 2 3/4"L pattern repeat.
- Can Apex be made into a rug or a stair runner?
- Yes. Any broadloom we carry can be cut and finished as an area rug or stair runner through our Design Studio, with serging, binding or a fabric or leather border. We draw it to your furniture plan or stair and confirm the yardage before ordering.
- Where can Apex be used?
- The mill rates Apex for Residential and commercial.
- What is the lead time on Apex?
- Made to order at the mill, typically 2 to 8 weeks for a cut from the running line. Ship date provided by the showroom with your order.
- Can I get a sample of Apex?
- Yes. Samples are complimentary for approved trade accounts and ship from the mill to you or your client. Add Apex to your sample list from this page, or send us the project and we will pull a set.
- How is Apex priced?
- To the trade only. Stock and running-line pieces are net quoted by the showroom to approved accounts; custom work is quoted with its rendering. We do not publish prices.