Hillside by Stanton, available to the trade through Interiors Fine Flooring in the Laguna Design Center, Laguna Niguel. Request a complimentary sample, add it to a project, or ask our team about custom sizes, colors and lead times.
Stanton Hillside carpet is a Wilton-woven broadloom from the Cottage collection, blending 50 percent wool with 50 percent Polysilk polyester on a 13 ft 2 in roll. The abstract, modern pattern repeats about 31 1/2 by 34 1/2 inches, the wool giving a matte, resilient hand and the polyester a soft sheen. Nine colorways include Cloud, Desert, Dove, Lagoon, Platinum, Raven, Sand and Wave. Wilton weaving locks the pattern into the backing, which is why it holds up on stairs and hallways, and it suits living rooms, dining rooms and bedrooms. A custom rug or runner can be cut and bound from the roll, with Stanton's limited residential wear warranty.
| Manufacturer | Stanton |
|---|---|
| Type | Broadloom |
| Collection | Cottage |
| Fiber | 50% Wool / 50% Polysilk |
| Construction | Wilton |
| Pattern | Abstract |
| Roll width | 13 ft 2 in |
| Features | Custom rug available |
Colorways (9): Cloud, Desert, Dove, Lagoon, Platinum, Raven, Sand, Shadow, Wave
To the trade only. Stock and running-line pieces are net quoted by the showroom; custom work is quoted with its rendering. Samples are complimentary and ship from the mill to you or your client.
Questions about Hillside
- What is Hillside made of?
- Hillside is 50% Wool / 50% polyester (Polysilk), in a Wilton construction.
- How wide is Hillside?
- Hillside is woven 13 ft 2 in wide. We plan seams to the room on the drawing before the order goes to the mill, allowing for the 31 1/2"W x 34 1/2"L pattern repeat.
- Can Hillside be made into a rug or a stair runner?
- Yes. Any broadloom we carry can be cut and finished as an area rug or stair runner through our Design Studio, with serging, binding or a fabric or leather border. We draw it to your furniture plan or stair and confirm the yardage before ordering.
- What is the lead time on Hillside?
- Made to order at the mill, typically 2 to 8 weeks for a cut from the running line. Ship date provided by the showroom with your order.
- Can I get a sample of Hillside?
- Yes. Samples are complimentary for approved trade accounts and ship from the mill to you or your client. Add Hillside to your sample list from this page, or send us the project and we will pull a set.
- How is Hillside priced?
- To the trade only. Stock and running-line pieces are net quoted by the showroom to approved accounts; custom work is quoted with its rendering. We do not publish prices.
