Cutting Edge by Kane Carpet, available to the trade through Interiors Fine Flooring in the Laguna Design Center, Laguna Niguel. Request a complimentary sample, add it to a project, or ask our team about custom sizes, colors and lead times.
Kane Carpet Cutting Edge is an abstract, modern Wilton weave from the Himalaya Collection, made in ultra fine heatset Eurolon polypropylene blended with polyester on a 13 foot 2 inch roll. The repeat is a generous 52 inches by 64.5 inches, giving the design a broad, loose movement across a floor. Four colorways are offered, 096 Oxford, CK-20458, CK-20459 and CK-20460. Polypropylene is solution dyed and resists staining, and the Wilton construction locks the pattern into the backing so it performs on stairs and in hallways. Cutting Edge carpet suits living rooms, dining rooms and bedrooms and can be cut and bound as a rug or runner.
| Manufacturer | Kane Carpet |
|---|---|
| Type | Broadloom |
| Collection | Himalaya Collection |
| Style number | CK-21780, CK-20460, CK-20459, CK-20458 |
| Fiber | Ultra fine Heatset Eurolon/Polyester |
| Construction | Wilton |
| Pattern | Modern, Transitional, Abstract |
| Roll width | 13 ft 2 in |
Colorways (4): 096 OXFORD (CK-21780), CK-20460, CK-20459, CK-20458
Dye method: Solution Dyed.
To the trade only. Stock and running-line pieces are net quoted by the showroom; custom work is quoted with its rendering. Samples are complimentary and ship from the mill to you or your client.
Questions about Cutting Edge
- What is Cutting Edge made of?
- Cutting Edge is Ultra fine Heatset polypropylene (Eurolon)/Polyester, in a Wilton construction.
- How wide is Cutting Edge?
- Cutting Edge is woven 13 ft 2 in wide. We plan seams to the room on the drawing before the order goes to the mill, allowing for the 52" x 64.5" pattern repeat.
- Can Cutting Edge be made into a rug or a stair runner?
- Yes. Any broadloom we carry can be cut and finished as an area rug or stair runner through our Design Studio, with serging, binding or a fabric or leather border. We draw it to your furniture plan or stair and confirm the yardage before ordering.
- What is the lead time on Cutting Edge?
- Made to order at the mill, typically 2 to 8 weeks for a cut from the running line. Ship date provided by the showroom with your order.
- Can I get a sample of Cutting Edge?
- Yes. Samples are complimentary for approved trade accounts and ship from the mill to you or your client. Add Cutting Edge to your sample list from this page, or send us the project and we will pull a set.
- How is Cutting Edge priced?
- To the trade only. Stock and running-line pieces are net quoted by the showroom to approved accounts; custom work is quoted with its rendering. We do not publish prices.
