Edgewater by Stanton, available to the trade through Interiors Fine Flooring in the Laguna Design Center, Laguna Niguel. Request a complimentary sample, add it to a project, or ask our team about custom sizes, colors and lead times.
Stanton Edgewater is a Wilton-woven broadloom from the Tides collection, made with 70 percent Royaltron polypropylene and 30 percent Polysilk polyester, a blend that reads with a soft sheen while staying practical about stains. The traditional pattern repeats at 31 1/2 inches wide by 28 inches long and comes in six colorways, among them Antique, Sky, Onyx and Stone. The roll is 13 feet 2 inches wide, and because the Wilton weave locks the design into the backing it holds up well on stairs and in hallways as well as living rooms, dining rooms and bedrooms. A custom rug or runner can be cut from the same goods.
| Manufacturer | Stanton |
|---|---|
| Type | Broadloom |
| Collection | Tides |
| Fiber | 70% Royaltron, Polypropylene / 30% Polysilk |
| Construction | Wilton |
| Pattern | Oriental/persian |
| Roll width | 13 ft 2 in |
| Features | Custom rug available |
Colorways (6): Antique, Beach, Ecru, Onyx, Sky, Stone
To the trade only. Stock and running-line pieces are net quoted by the showroom; custom work is quoted with its rendering. Samples are complimentary and ship from the mill to you or your client.
Questions about Edgewater
- What is Edgewater made of?
- Edgewater is 70% polypropylene (Royaltron) / 30% polyester (Polysilk), in a Wilton construction.
- How wide is Edgewater?
- Edgewater is woven 13 ft 2 in wide. We plan seams to the room on the drawing before the order goes to the mill, allowing for the 31 1/2"W x 28"L pattern repeat.
- Can Edgewater be made into a rug or a stair runner?
- Yes. Any broadloom we carry can be cut and finished as an area rug or stair runner through our Design Studio, with serging, binding or a fabric or leather border. We draw it to your furniture plan or stair and confirm the yardage before ordering.
- What is the lead time on Edgewater?
- Made to order at the mill, typically 2 to 8 weeks for a cut from the running line. Ship date provided by the showroom with your order.
- Can I get a sample of Edgewater?
- Yes. Samples are complimentary for approved trade accounts and ship from the mill to you or your client. Add Edgewater to your sample list from this page, or send us the project and we will pull a set.
- How is Edgewater priced?
- To the trade only. Stock and running-line pieces are net quoted by the showroom to approved accounts; custom work is quoted with its rendering. We do not publish prices.