Elevation by Stanton, available to the trade through Interiors Fine Flooring in the Laguna Design Center, Laguna Niguel. Request a complimentary sample, add it to a project, or ask our team about custom sizes, colors and lead times.
Stanton Elevation is a Wilton-woven broadloom from the Contour Collection, made in a 13 ft 2 in width from 78 percent Royaltron polypropylene and 22 percent Polysilk polyester. The weave gives an abstract, modern pattern with a long 15 3/4 by 38 3/4 inch half-drop repeat, and the Polysilk fiber adds a soft sheen against the matte polypropylene ground. Four quiet colorways are offered, including Ivory, Platinum and Sandstone. Because the Wilton construction locks the pattern into the backing, it holds up well on stairs and hallways, and it suits living rooms, dining rooms and bedrooms. A custom rug or runner can be cut and bound from the roll.
| Manufacturer | Stanton |
|---|---|
| Type | Broadloom |
| Collection | Contour Collection |
| Fiber | 78% Royaltron, Polypropylene / 22% Polysilk |
| Construction | Wilton |
| Pattern | Abstract |
| Roll width | 13 ft 2 in |
| Features | Custom rug available |
Colorways (4): Ivory, Platinum, Sandstone, Snowcap
To the trade only. Stock and running-line pieces are net quoted by the showroom; custom work is quoted with its rendering. Samples are complimentary and ship from the mill to you or your client.
Questions about Elevation
- What is Elevation made of?
- Elevation is 78% polypropylene (Royaltron) / 22% polyester (Polysilk), in a Wilton construction.
- How wide is Elevation?
- Elevation is woven 13 ft 2 in wide. We plan seams to the room on the drawing before the order goes to the mill, allowing for the 15 3/4"W x 38 3/4"L HD pattern repeat.
- Can Elevation be made into a rug or a stair runner?
- Yes. Any broadloom we carry can be cut and finished as an area rug or stair runner through our Design Studio, with serging, binding or a fabric or leather border. We draw it to your furniture plan or stair and confirm the yardage before ordering.
- What is the lead time on Elevation?
- Made to order at the mill, typically 2 to 8 weeks for a cut from the running line. Ship date provided by the showroom with your order.
- Can I get a sample of Elevation?
- Yes. Samples are complimentary for approved trade accounts and ship from the mill to you or your client. Add Elevation to your sample list from this page, or send us the project and we will pull a set.
- How is Elevation priced?
- To the trade only. Stock and running-line pieces are net quoted by the showroom to approved accounts; custom work is quoted with its rendering. We do not publish prices.
